User Manual

How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn o the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4 Install the shelf supports in the
opposite sequence.
How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
Warning! There is a risk of burns.
Caution! If there are other
appliances installed in the same
cabinet, do not use them at the
same time as this function. It can
cause damage to the oven.
Warning! Ensure that any pets
(especially birds) are taken as far
as possible from the vicinity of the
appliance location during and
after the Pyrolytic cleaning and
rst use maximum temperature
operation. Keeping them in a
dierent room would be the
preferred option during the
pyrolytic cycle and until appliance
has cooled down again to room
temperature. Good ventilation
has to be provided during and
after (till appliance cool down)
operations of the pyrolytic cycle
and rst maximum temperature
use cycle.
ENGLISH 10
To download the full version visit www.ikea.com