User Manual

Adjusting the power setting
To set the cooking zone touch the sensor
eld related to this zone. The display
highlights the heat setting indication ( ).
Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
First set the power setting.
To start the function touch
. The symbol
comes on for 4 seconds.
To stop the function touch . The power
setting that you set before comes on.
When you switch o the appliance, you also
stop this function.
Child Lock
This function prevents an accidental
operation of the appliance.
To activate the function:
• Switch on the appliance with . Do not
set the power settings.
• Touch
for 4 seconds. The symbol
comes on.
• Switch o the appliance with .
To deactivate the function:
• Switch on the appliance with . Do not
set the power settings. Touch for 4
seconds. The symbol
comes on.
• Switch
o the appliance with .
To override the function for only one cooking
time:
• Switch on the appliance with . The
symbol comes on.
• Touch for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
• When you switch o the appliance with
, the function operates again.
OSound Control (Deactivation and
activation of the sounds)
Originally the sounds of the appliance are
activated.
Activating and deactivating the sounds:
1. Switch o the appliance.
2. Touch
for 3 seconds. The display
comes on and goes out.
3. Touch
for 3 seconds. On the left front
zone display
comes on and on the
right front zone display or comes
on.
4. Touch of the rear right zone to
choose one of the following:
• on the right front zone display -
the sounds are o.
• on the right front zone display -
the sounds are on.
To conrm your selection wait for 10 seconds
until the appliance switches o
automatically.
When the function is set to
you can hear
the sounds only when:
• you touch .
• you put something on the control panel.
If there is a problem with
electrical supply and the
appliance switches o it does not
keep previous settings.
ENGLISH 13