Instruction for Use
ENGLISH 8
WARNING:- Use safety gloves.
- Disconnect the appliance from the
power supply.
Perimetersuctionpanel
The suction panel must be cleaned with the
same frequency as the grease lter. Use a
damp cloth and a soft liquid detergent.
Do not use products containing abrasives.
DO NOT USE ALCOHOL
The panel normally covers the grease lters,
and must therefore be opened each time
access to the grease lters and the inside
of the hood is required (e.g. to replace the
carbon lters).
Opening: Pull the panel (LEFT SIDE)
downwards.
Closing: The panels must be xed to the
appropriate pins on the surface of the hood.
WARNING: Always check that the panel is
tted properly.
Tocleanthegreaselter
The lter traps all cooking grease particles.
The metal grease lter has unlimited
duration. It should be washed at least once
a month, either by hand, or by placing it in
the dishwasher (use a short cycle and low
temperature).
If washed in the dishwasher, the grease
lter surface may become matt. This will not
cause any reduction of performance.
To remove the lter pull out the handle.
After the lter has been washed and dried,
replace following the inverse procedure.
Replacingthehalogenlamps
WARNING:- Only use 12V 20W 30°
Ø35 12V GU4 halogen lamps.
1. Disconnect the hood from the electric
power supply.
2. Use a small screwdriver to remove the
lamp by pushing its edges upwards.
3. Remove the faulty light bulb and replace
with a new one.
Cleaningandmaintenance