Instruction for Use

ENGLISH 9
Replacingthehalogenlamps
WARNING:- Only use 12V 10W 30°
Ø35 12V GU4 halogen lamps.
1. Disconnect the hood from the electric
power supply.
2. Use a small screwdriver to remove the
lamp by pushing its edges upwards.
3. Remove the faulty light bulb and replace
with a new one.
IMPORTANT: make sure you don’t touch the
lamp with your bare hands.
Charcoalltermaintenance(ifthehoodis
installedinrecirculationmode)
1. Remove the grease lters.
2. Fit (bayonet attachment) 1 adaptor each
conveyour side. Lock in place.
3. Fit (bayonet attachment) 1 charcoal lter
each conveyour side. Lockit on adaptor.
4. Reverse the above procedure to remove
the charcoal lter.
5. Ret the grease lters,
Charcaol lter is neither lavable nor
regenerable.
Replace it every 4 months.