HJÄLPSAM GB
ENGLISH 4
ENGLISH 4 Contents Safety information Product description Control panel Programmes Options Before first use Daily use 4 6 6 6 7 8 10 Hints and tips Care and cleaning Troubleshooting Technical information Environment concerns IKEA GUARANTEE 12 13 14 15 16 16 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
ENGLISH Electrical connection Warning! Risk of fire and electrical shock. • The appliance must be earthed. • Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable. Contact the service or an electrician to change a damaged mains cable.
ENGLISH 6 Product description 1 2 3 4 5 6 7 8 9 9 8 7 6 1 2 5 3 4 Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket Control panel B A 1 2 4 1 On/off button 2 Programme indicators Indicators 3 3 Indicators 4 Programme button. Description End indicator. Salt indicator. This indicator is off while the programme operates.
ENGLISH Programme1) 3) 4) 5) 7 Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) Fresh soil Crockery and cutlery Wash 60 °C Rinse 30 0.8 8 Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 120 - 130 0.8 - 0.9 12 - 13 All Prewash 11 0.1 5 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values.
ENGLISH 8 2. Wait until the programme indicator (A) goes off. The end indicator is off and programme indicator (B) continues to flash. • The acoustic signals are off. 3. Press the programme button. The end indicator comes on. • The acoustic signals are on. 4. Deactivate the appliance to confirm. Before first use 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener.
ENGLISH 9 Manual adjustment 1 2 Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold the programme button until the programme indicator (A) flashes and the programme indicator (B) comes on. 4.
ENGLISH 10 3 4 3 2 -- 1 4 MA X + 5 6 A 32 -- 1 4 MA X + Fill the rinse aid dis- To adjust the repenser when the leased quantity of lens (A) is clear. rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). Refer to ‘TROUBLESHOOTING’. Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’.
ENGLISH 11 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4. Start the shortest programme with a rinsing phase, without detergent and without dishes. 5. Adjust the water softener to the water hardness in your area. 6. Adjust the released quantity of rinse aid. 3 4 5 If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door.
ENGLISH At the end of the programme When the programme is completed, an intermittent acoustic signal operates and the end indicator comes on. 1. Press the on/off button to deactivate the appliance. 2. Close the water tap. • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. 12 • First remove the items from the lower basket, then from the upper basket. There can be water on the sides and on the door of the appliance.
ENGLISH 13 Before starting a programme Make sure that: • The filters are clean and correctly installed. • The spray arms are not clogged. • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tablets). • The cap of the salt container is tight.
ENGLISH 14 Troubleshooting The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. Alarm code With some problems, different indicators flash continuously or intermittently at the same time to show an alarm code. Problem • The indicator of the set programme flash- The appliance does not fill with water. es continuously. • The end indicator flashes 1 time intermittently.
ENGLISH 15 Problem Possible cause Possible solution The appliance does not drain the water. The sink spigot is clogged. Clean the sink spigot. The water drain hose has a kink or a bend. Make sure that the position of the hose is correct. The salt indicator continues to stay on after the replenishment of the salt container. This can occur when you are If after 3 or 4 programmes, the using salt that needs more time salt indicator continues to stay to dissolve. on, contact the service.
ENGLISH Power consumption 16 Left-on mode 1.90 W Off-mode 0.10 W 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
ENGLISH What is not covered under this guarantee? • Normal wear and tear. • Deliberate or negligent damage, damage caused by failure to observe operating instructions, incorrect installation or by connection to the wrong voltage, damage caused by chemical or electro-chemical reaction, rust, corrosion or water damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal environmental conditions. • Consumable parts including batteries and lamps.
ENGLISH – connections to electricity (if machine comes without plug and cable), to water and to gas since they have to be executed by an authorized service engineer. 3. ask for clarification on user manual contents and specifications of the IKEA appliance. To ensure that we provide you with the best assistance, please read carefully the Assembly Instructions and/or the User Manual section of this booklet before contacting us.
Country België Belgique Phone number 070 246016 Call Fee Opening time Binnenlandse gesprekskosten 8 tot 20 Weekdagen Tarif des appels nationaux 8 à 20. En semaine България 0700 10 218 Такса за повикване от страната От 9 до 18 ч в работни дни Česká republika 246 019721 Cena za místní hovor 8 až 20 v pracovních dnech Danmark 70 15 09 09 Landstakst man.-fre. 09.00-20.00 lør. 09.00-16.00 1 søndag pr. måned, normalt første søndag i måneden Deutschland 01803-334532 (0,09 € / Min.
117923650-C-112012 © Inter IKEA Systems B.V.
