Operation Manual

Before starting a programme
Make sure that:
• The filters are clean and correctly instal-
led.
• The spray arms are not clogged.
• The position of the items in the baskets is
correct.
• The programme is applicable for the type
of load and for the degree of soil.
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
Care and cleaning
Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the mains
socket.
Dirty filters and clogged spray arms
decrease the washing results.
Make a check regularly and, if necessary,
clean them.
Cleaning the filters
1
2
A
C
B
3
2
1
To remove filters (B)
and (C), turn the
handle counter-
clockwise and re-
move. Pull apart fil-
ter (B) and (C).
Wash the filters with
water.
4
A
Remove filter (A).
Wash the filter with
water.
5
A
D
Put filter (A) to its
initial position.
Make sure that it
assembles correctly
under the two
guides (D).
6
1
2
Assemble filters (B)
and (C). Put them
into position in filter
(A). Turn the handle
clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
ENGLISH 13