Operation Manual

The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators
, , , ,
and flash and the display is
blank.
2. Press .
• The indicators , , ,
and are off.
• The indicator still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
– = TimeBeam deactivated.
3. Press repeatedly to change the
colour.
4. Press on/off to confirm the setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
While the drying phase operates,
a device opens the appliance
door. The door is then kept ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities, deactivate the
function.
AutoOpen is automatically activated with
all programmes excluding
.
AutoOpen is deactivated when
the programme P3 (Quick) is
combined with ExtraHygiene
option due to the high
temperature.
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
and until
the indicators
, , , ,
and start flashing and the
display is blank.
2. Press .
• The indicators , , ,
and are off.
• The indicator still flashes.
• The display shows the current setting:
= AutoOpen activated.
3. Press to change the setting:
= AutoOpen deactivated.
4. Press on/off to confirm the setting.
ENGLISH
15