User Manual

4
WALL ANCHORING GUIDE:
The hardware you should use to secure your
furniture to the wall depends on both the type of
furniture you have and your wall material.
TypeofWallMaterial:
Using the guide below, identify your wall material
and the appropriate steps to take for that wall
material.
Drywallorplasterwithavailablewoodstud:
• Mark the attachment point(s) with a pencil at the
appropriate height and positioned over wood
stud(s).
• Drill 1/8-inch (3mm) diameter pilot hole(s) into
the wood stud(s), at the height you marked with
pencil.
Drywallwithoutavailablewoodstud:
• Mark the attachment point(s) with a pencil at the
appropriate height.
• Drill 5/16-inch (8mm) diameter hole(s) through
the wall at the height you marked with pencil.
• Drive the plastic plug(s) into the hole(s), using a
hammer if needed.
Masonry:
• Mark the attachment point(s) with a pencil at the
appropriate height.
• Drill 5/16-inch (8mm) diameter hole(s) 2 and
3/4-inches (70mm) deep into the wall at the
height you marked with pencil.
• Drive the plastic plug(s) into the hole(s), using a
hammer if needed.
Ifyourwallmaterialisnotlistedhere,orifyou
haveanyquestions,consultyourlocalhardware
store.
English