User manual

3
To remove filters (B)
and (C) turn the
handle
counterclockwise
and remove. Pull
apart filter (B) and
(C). Wash the filters
with water.
4
Remove filter (A).
Wash the filter with
water.
5
D
Put the flat filter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
6
Assemble filters (B)
and (C). Put them
into position in filter
(A). Turn the handle
clockwise until it
locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance
Cleaning the filter of the inlet hose
1
Close the water tap.
2
A
B
Disconnect the hose.
Press the lever B
and turn the
fastener A
clockwise.
3
Clean the filter of
the inlet hose.
4
Cleaning the spray arms
Do not remove the spray arms. If the holes
in the spray arms are clogged, remove
remaining parts of soil with a thin pointed
object.
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
ENGLISH
14