User Manual

Factory reset your devices

For light sources:

Toggle the main switch 6 times.

For remote control:

Press the pairing button 4 times within 5 seconds.

Synchronizing

If your light source becomes unsynchronized, a long

press on the left (<) or right (>) buttons will return

the light source to its default setting (2700K).

Changing the battery

When the remote control is used regularly and as

intended, the batteries will last for approximately

2 years.

When it’s time to replace the battery, a red LED

indicator will ash when you press any button on

the remote control.

Open the battery lid and replace the battery with

two new AAA/HR03 batteries.

Caution!

Risk of explosion if battery is replaced by an

incorrect type. Dispose of used batteries according

to the instructions.

Important!

• The remote control is for indoor use only and

can be used in temperatures ranging from 0ºC

to 40 ºC.

• Do not leave the remote control in direct sunlight

or near any heat source, as it may overheat.

• The range between the remote control and the

receiver are measured in open air.