GB MEDELSTOR
ENGLISH 4
ENGLISH Contents Safety information Safety instructions Product description Control panel Programmes Options Settings Before first use 4 5 7 7 8 9 10 12 Daily use Hints and tips Care and cleaning Troubleshooting Technical information ENVIRONMENT CONCERNS IKEA GUARANTEE 14 16 17 18 20 21 21 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions.
ENGLISH 5 General Safety • • • • • • • • • • • This appliance is intended to be used in household and similar applications such as: – farm houses; staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments. Do not change the specification of this appliance. The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 8 (0.8) bar (Mpa) Obey the maximum number of 9 place settings.
ENGLISH Electrical connection and turn the fastener (A) clockwise. Warning! Risk of fire and electrical shock. • The appliance must be earthed. • Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable.
ENGLISH 7 Serial Number : • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance. Disposal Warning! Risk of injury or suffocation.
ENGLISH 8 7 Half load button 8 Reset button 9 Indicators Indicators Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. Programmes Programme Degree of soil Programme phaType of load ses Consumption values 1) Duration (min) P1 2) P2 3) P3 4) P4 5) P5 Energy (kWh) Water (l) All Crockery, cutlery, pots and pans • Prewash • Wash from 45 °C to 70 °C • Rinses • Dry 40 - 140 0.5 - 1.
ENGLISH Programme 9 Degree of soil Programme phaType of load ses Consumption values 1) Duration (min) P6 All • Prewash 14 Energy (kWh) 0.1 Water (l) 5 6) 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH What to do if you want to stop using multitablets Before you start to use detergent, salt and rinse aid separately do the following procedure. 1. Deactivate the Multitab option. 2. Set the highest level of the water softener. 3. Make sure that the salt and rinse aid containers are full. 4. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 5. When the programme is completed, adjust the water softener according to the water hardness in your area. 6.
ENGLISH 11 detrimental effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results.
ENGLISH rinse aid dispenser. In this case the drying results may not be satisfactory. With the rinse aid dispenser deactivated, the rinse aid indicator is always off. How to deactivate the rinse aid dispenser The appliance must be in programme selection mode. 1. To enter the user mode, press and hold simultaneously and until the indicators , and start to flash and the display is blank. . 2. Press and go off. • The indicators • The indicator continues to flash. • The display shows the current setting.
ENGLISH 13 When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. The washing phase starts only after this procedure is completed. The procedure will be repeated periodically. 5 The salt container Caution! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent this, after the replenishment, start a programme.
ENGLISH 14 5 M A2X 3 1 - + 4 To adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). Refer to "TROUBLESHOOTI NG". Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4.
ENGLISH 5 If the programme has a prewash phase, put a small quantity of detergent in on the inner part of the appliance door. Setting and starting a programme The Auto Off function This function decreases energy consumption by automatically deactivating the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the programme. • After 5 minutes if the programme has not started. Starting a programme with delay start 1. Set a programme. 2.
ENGLISH Hints and tips General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • Remove larger residues of food from the dishes into the waste bin. • Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available) or select a programme with a prewash phase. • Always use the whole space of the baskets.
ENGLISH 17 Before starting a programme • The correct quantity of detergent is used. Make sure that: Unloading the baskets • The filters are clean and correctly installed. • The cap of the salt container is tight. • The spray arms are not clogged. • There is dishwasher salt and rinse aid (unless you use multi- tablets). • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. 1.
ENGLISH 18 6 5 3 4 D Put the flat filter (A) Assemble filters (B) back in place. Make and (C). Put them into position in filter sure that it is correctly positioned (A). Turn the handle under the 2 guides clockwise until it locks. (D). An incorrect position of the filters can cause bad washing results and damage to the appliance Cleaning the filter of the inlet hose 1 Cleaning the spray arms Do not remove the spray arms.
ENGLISH 19 Problem and alarm code Possible solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown. • The appliance has started the procedure to recharge the resin inside the water softener.
ENGLISH 20 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or bluish layers on glasses and dishes. • The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too much. There are stains and dry water drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position.
ENGLISH ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
ENGLISH • Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible color differences. • Accidental damage caused by foreign objects or substances and cleaning or unblocking of filters, drainage systems or soap drawers. • Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings.
ENGLISH Assembly Instructions and/or the User Manual section of this booklet before contacting us. How to reach us if You need our service Please refer to the last page of this manual for the full list of IKEA appointed contacts and relative national phone numbers. In order to provide You with a quicker service, we recommend that You use the specific phone numbers listed at the end of this manual. Always refer to the numbers listed in the booklet of the specific appliance You need an assistance for.
Country België Belgique Phone number 070 246016 Call Fee Opening time Binnenlandse gesprekskosten 8 tot 20 Weekdagen Tarif des appels nationaux 8 à 20. En semaine България 00359888164080 0035924274080 Такса за повикване от страната От 9 до 18 ч в работни дни Česká republika 246 019721 Cena za místní hovor Danmark 70 15 09 09 Landstakst 8 až 20 v pracovních dnech man. - fre. 09.00 - 20.00 lør. 09.00 - 16.00 1 søndag pr.
100003430-A-272015 © Inter IKEA Systems B.V.
