User Manual

results. It removes limescale and grease
buildup.
When the appliance senses the need for
cleaning, the indicator is on. Start the
Machine Care programme to clean the
appliance interior.
How to start the Machine Care
programme
Before starting the Machine Care
programme, clean the lters and
spray arms.
1. Use a descaler or a cleaning product
designed specically for dishwashers.
Follow the instructions on the packaging.
Do not put dishes in the baskets.
2. Press and hold simultaneously
and
for about 3 seconds.
The indicators and ash. The display
shows the programme duration.
3. Close the appliance door to start the
programme.
When the programme is complete, the
indicator
is o.
Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a soft
damp cloth.
• Do not use abrasive products, abrasive
cleaning pads, sharp tools, strong
chemicals, scourer or solvents.
• To maintain the performance of your
appliance, use a cleaning product
designed
specically for dishwashers at
least once every two months. Carefully
follow the instructions on the packaging
of the product.
• For optimal cleaning results, start the
Machine Care programme.
Removal of foreign objects
Check the lters and the sump after each
use of the dishwasher. Foreign objects (e.g.
pieces of glass, plastic, bones or toothpicks,
etc) decrease the cleaning performance and
can cause damage to the drain pump.
1. Disassemble the lters system as
instructed in this chapter.
2. Remove any foreign objects by hand.
Caution! If unable to remove
the objects, contact an
Authorised Service Centre.
3. Reassemble the lters as instructed in
this chapter.
External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
Cleaning the lters
1
Make sure that there
are no residues of
food or soil in or
around the edge of
the sump.
2
C
B
A
The lter system is
made of three parts.
ENGLISH 22