User Manual
Table Of Contents
- Contents
- Safety information
- Safety instructions
- Product description
- Control panel
- Programme selection
- Basic settings
- Before first use
- Daily use
- Using the detergent
- How to select and start a programme
- How to select and start the programme
- How to activate options
- How to select and start the programme AUTO
- How to delay the start of a programme
- How to cancel the delay start while the countdown operates
- How to cancel a running programme
- Opening the door while the appliance operates
- The Auto Off function
- End of the programme
- Hints and tips
- Care and cleaning
- Troubleshooting
- Technical information
3
To remove lters (B)
and (C), turn the
handle
counterclockwise
and pull it upwards.
Remove the
lter (C)
out of lter (B).
Wash the
lters with
water.
4
Remove the at lter
(A). Wash the lter
with water.
5
D
Put the at lter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
6
Reassemble the
lters (B) and (C). Put
them back in the
lter (A). Turn the
handle clockwise
until it locks.
An incorrect position of the
lters
can cause bad washing results
and damage to the appliance
Cleaning the lter of the inlet hose
1
Close the water tap.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
3
Clean the lter of
the inlet hose.
4
Cleaning the lower spray arm
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the
holes. Clogged holes can cause
unsatisfactory washing results.
ENGLISH
23