User Manual
Table Of Contents
- Contents
- Safety information
- Safety instructions
- Product description
- Control panel
- Programme selection
- Basic settings
- Before first use
- Daily use
- Using the detergent
- How to select and start a programme
- How to select and start the programme
- How to activate options
- How to select and start the programme AUTO
- How to delay the start of a programme
- How to cancel the delay start while the countdown operates
- How to cancel a running programme
- Opening the door while the appliance operates
- The Auto Off function
- End of the programme
- Hints and tips
- Care and cleaning
- Troubleshooting
- Technical information
1
To remove the lower
spray arm, pull it
upwards.
2
Wash the spray arm
under running
water. Use a thin
pointed tool, e.g. a
toothpick, to remove
particles of soil from
the holes.
3
To install the spray
arm back, press it
downwards.
Cleaning the upper spray arms
We recommend to clean the upper spray
arms regularly to prevent soil from clogging
the holes. Clogged holes can cause
unsatisfactory washing results.
1
The upper spray
arms are placed
under the upper
basket.
2
A
B
C
The spray arms (B)
are installed in the
duct (A) with the
mounting elements
(C).
3
Pull out the upper
basket.
4
To detach the spray
arm from the duct,
turn the mounting
element clockwise.
5
Wash the spray arm
under running
water. Use a thin
pointed tool, e.g. a
toothpick, to remove
particles of soil from
the holes.
6
Insert the mounting
element in the spray
arm and
x it in the
duct by turning the
mounting element
counterclockwise.
Make sure the
mounting element
locks into place.
ENGLISH 24