User manual

Problem Possible cause Remedy
The oven lamp does not op-
erate.
The oven lamp is defective. Replace the oven lamp.
The Pyrolysis does not start.
The display shows C1.
The shelf supports are not
removed.
Remove the shelf supports.
The Pyrolysis does not start.
The display shows C2.
The Pyrolysis or Defrost
function is set when the plug
of the core temperature sen-
sor is in the socket.
Remove the plug of the core
temperature sensor from the
socket.
The Pyrolysis does not start.
The display shows C3.
The door is not fully closed
or the door lock is defective.
Fully close the door.
The display shows F102. The door is not fully closed
or the door lock is defective.
1. Fully close the door.
2. Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
3. If the display shows
F102 again, contact the
service centre.
The oven does not heat up.
The display shows Demo.
The demo mode is activa-
ted.
1. Deactivate the appli-
ance.
2. Press and hold the but-
ton +.
3. When an acoustic signal
sounds, turn the knob
for the oven functions to
the first function. Demo
flashes in the display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button +.
6. Turn the knob for the
temperature clockwise
three times. The acoustic
signal sounds three
times. The demo mode
is deactivated.
ENGLISH 19