User manual

Activating a heating function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press to confirm.
4. Select a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
Steam cooking
The water drawer cover is in the control
panel.
Warning! Do not put water
directly into the steam generator.
Use only water. Do not use
filtered (demineralised) or
distilled water. Do not use other
liquids. Do not put flammable or
alcoholic liquids into the water
drawer.
1.
Prepare the food in the correct
cookware.
2. Press the cover of the water drawer to
open it.
3. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
Do not overfill the water
drawer.
There is no indication that the
water drawer is full, apart
from the bottom steam
generator.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and the
temperature.
7. If necessary, set the function Duration
or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
When the steam generator is
empty, an acoustic signal sounds.
The signal sounds at the end of the cooking
time.
8. Deactivate the appliance.
9. Empty the water drawer after the steam
cooking is completed.
Caution! The appliance is
hot. There is a risk of burns.
Be careful when you empty
the water drawer.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function
operates.
To activate the function, hold for 3
seconds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
ENGLISH
16