User manual

= the rinse aid empty notification is
deactivated.
4. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default, this acoustic signal is activated and
it is possible to deactivate it.
In addition, an acoustic signal will sound
before the AutoOpen will open the door.
This acoustic signal stops only if AutoOpen
is deactivated.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators , , and
start to flash and the display is blank.
2. Press
• The indicators , and
go off.
• The indicator
continues to flash.
• The display shows the current setting:
= Acoustic signal on.
3. Press to change the setting.
= Acoustic signal off.
4. Press the on/off button to confirm the
setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
While the drying phase operates,
a device opens the appliance
door. The door is then kept ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities, deactivate the
function.
AutoOpen is automatically activated with
all programmes excluding .
AutoOpen is deactivated when
the programme P3 (Quick) is
combined with ExtraHygiene
option due to the high
temperature.
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
and until
ENGLISH
14