User Manual

6
Technical data
Model name RODULF si/st desk 140x80
Typenumber RODULF-GF-470
Input 100–240 V AC, 50–60 Hz, 3.2–1.5 A
Standbypowerconsumption <0.1 W
Temperature interval at usage 50–104 °F or 10–40 °C.
Temperature interval at storage 0–158 °F or -18–70 °C
Operatinghumidity 20–90 % RH at 40 °C
Sound level <50 dB(A)
Height setting interval 68–115 cm or 26.8–45.3 inches
Maximum load 80 kg or 176 lb
Troubleshootingguide
NOTE!
Do always disconnect the cable from the wall socket before maintenance!
Symptom Check Try
The desk does not move.
Make sure that all cable are
connected.
Connect the cables.
Follow installation instructions
and perform a reset.
Unplug the desk from the wall
socket for roughly 1 minute and
reconnect.
Only one column is moving.
Perform a reset. If there’s still
only one column moving, replace
the column that is not moving.
The columns are moving at
dierent speeds.
It is possible to move the slower
column by pulling/pushing.
Replace the column that is
moving slower.
It is not possible to move the
slower column by pulling/
pushing.
Replace the column that is
moving faster.
The desk only moves short
distances.
Make sure that the desk is not
overloaded.
Unload the desk. If the problem
remains, replace the control box.
The desk stops and reverse
during operation.
Make sure that nothing is
blocking the desk movement.
Remove the obstacle. If the
problem remains replace the
whole underframe.
The desk is not able to drive all
the way up or all the way down.
Check all connections.
Perform a reset.
The desk can only drive in one
direction (up or down).
The desk is not horizontal.