User manual

German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener level
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent or
multi-tabs (with or without salt), set the
proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators , , and
flash and the display is blank.
2. Press
.
• The indicators , and
are off.
• The indicator still flashes.
• The display shows the current setting:
e.g. = level 5.
3. Press
repeatedly to change the
setting.
4. Press the on/off button to confirm the
setting.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators
, , and
start flashing and the display is blank.
2. Press .
• The indicators , and are off.
• The indicator
still flashes.
• The display shows the current setting.
– = rinse aid empty notification
activated.
–
= rinse aid empty
notification deactivated.
3. Press to change the setting.
4. Press on/off to confirm the setting.
ENGLISH
11