User Manual

ENGLISH 10
POWER LEVEL TYPE OF COOKING
LEVEL USE
(indicating cooking experience and habits)
Maximum power Boost Fast heating
Ideal for rapidly increasing the temperature of food to a fast boil
(for water) or for rapidly heating cooking liquids.
8-9
Frying - boiling
Ideal for browning, starting to cook, frying deep-frozen products,
bringing liquids to the boil quickly
Browning - sautéing - boiling
- grilling
Ideal for sautéing, maintaining a lively boil, cooking and grilling.
5-7
Browning - cooking - stewing -
sautéing - grilling
Ideal for sautéing, maintaining a gentle boil, cooking and grilling,
and preheating accessories.
Cooking - stewing - sautéing -
grilling - cooking until creamy
Ideal for stewing, maintaining a gentle boil, cooking and grilling
(for longer periods).
3-4
Cooking - simmering -
thickening - creaming
Ideal for slower-cook recipes (rice,sauces,roast,sh) with liquids
(e.g. water, wine, broth, milk), and for creaming pasta.
Ideal for slow-cook recipes (quantities under 1 litre: rice, sauces,
roasts, sh) with liquids (e.g. water,wine,broth,milk).
1-2
Melting - defrosting
Ideal for softening butter, gently melting chocolate, thawing small
items.
Keeping food warm - creaming
risotto
Ideal for keeping small portions of just-cooked food or serving
dishes warm and for creaming risotto.
Zero power 0 -
Hob in stand-by or o mode (possible end-of-cooking residual
heat, indicated by an “H“).
Cooking tables
WARNING!:
• Do not use steam cleaning equipment.
• Before cleaning, make sure the cooking zones are switched
o and that the residual heat indicator (“H“) is not displayed.
Important:
• Do not use abrasive sponges or scouring pads as they may
damage the glass.
• After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
• A surface that is not kept suitably clean may reduce the
sensitivity of control panel buttons.
• Use a scraper only if residues are stuck to the hob. Follow the
scraper manufacturer’s instructions to avoid scratching the
glass.
• Sugar or foods with a high sugar content can damage the hob
and must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a special hob
cleaner (follow the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to
move or vibrate.
• After cleaning the hob, dry thoroughly.
Cleaning and maintenance
• Check that the electricity supply has not been shut o.
• If you are unable to turn the hob o after using it, disconnect
it from the power supply.
• If alphanumeric codes appear on the display when the hob is
switched on, consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or
any objects resting on any of the hob buttons can accidentally
activate or deactivate the control panel lock function.
Troubleshooting
Display code Description Possible causes Solution
F0E1 Cookware is detected but it is
not compatible with requested
operation.
The cookware is not well
positioned on the cooking
zone, or it is not compatible
with one or more cooking
zones.
Press On/O button twice to
remove the F0E1 code and restore
the functionality of the cooking
zone. Then, try to use the cookware
with a dierent cooking zone, or use
dierent cookware.
F0E7 Wrong power cord connection The power supply connection
is not exactly as indicated in
“ELECTRICAL CONNECTION“
paragraph.
Adjust the power supply connection
according to “ELECTRICAL
CONNECTION“ paragraph.
F0EA The control panel switches o
because of excessively high
temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down
before using it again.