User manual

6. Remove water from the cavity
embossment.
Warning! Make sure that the
oven is cold before you
remove the remaining water
from the cavity embossment.
Heat-up indicator
When the oven function operates, the bars
in the display
appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY
To show or change the
time of day. You can
change the time of day
only when the oven is off.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
END
To set when the oven
turns off. Use only when a
heating function is set.
TIME DELAY
Combination of DURA-
TION and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
Clock function Application
00:00
COUNT UP
TIMER
If you do not set any oth-
er clock function the
COUNT UP TIMER auto-
matically monitor how
long the oven works.
The counting starts imme-
diately when the oven
starts to heat.
The Count Up Timer can-
not be used with the func-
tions: DURATION, END,
core temperature sensor.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and "12:00".
"12" flashes.
1. Turn the control knob to set the hours.
2. Press to confirm and set the minutes.
The display shows and the set hour.
"00" flashes.
3. Turn the control knob to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
ENGLISH
14