User manual

Setting the DURATION function
1. Set a heating function. Press to
confirm.
2. Press again and again until
starts to flash.
3. Turn the control knob to set the minutes
and press
to confirm. Turn the control
knob to set the hours and press to
confirm.
When the set Duration time ends the signal
sounds for 2 minutes. and time setting
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
This function is not available for Pyrolysis
and for some oven functions.
Setting the END function
1. Set a heating function. Press to
confirm.
2. Press again and again until starts
to flash.
3. Turn the control knob to set the hours
and press
to confirm. Turn the control
knob to set the minutes and press to
confirm.
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
This function is not available for Pyrolysis
and for some oven functions.
Setting the TIME DELAY function
1. Set a heating function. Press to
confirm.
2. Press again and again until
starts to flash.
3. Turn the control knob to set the minutes
for DURATION time and press to
confirm. Turn the control knob to set the
hours for DURATION time and press
to confirm.
The display shows flashing
.
4. Turn the control knob to set the hours for
END time and press to confirm. Turn
the control knob to set the minutes for
END time and press to confirm. The
display shows
and the set
temperature.
Oven turns on automatically later on, works
for the set DURATION time and stops at the
set END time.
At the set END time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off.
5. Press any button or open the oven door
to stop the signal.
6. Turn the knobs to the off position.
You can change the heating function and
the temperature after you set the TIME
DELAY function.
Turn the knobs to the off positions to stop
the TIME DELAY function.
Setting the MINUTE MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press again and again until starts
to flash.
2. Turn the control knob to set the seconds
and than the minutes.
• Press one more time to set the
minutes
• Press
two more times to set the
hours
3. Press to confirm.
4. The MINUTE MINDER starts
automatically after 5 seconds.
ENGLISH
15