User Manual
Table Of Contents
- Contents
- Safety information
- Safety instructions
- Product description
- Technical data
- Inspection check list
- First use
- Control panel
- Programmes
- Settings
- Daily use
- Activating the appliance
- Loading the laundry
- Filling the detergent and additives
- Setting a programme
- Starting a programme
- Starting a programme with the delay start
- The AutoAdjust System load detection
- Pausing a programme and changing options
- Cancelling a running programme
- Opening the door
- End of the programme
- Draining water out after end of cycle
- Stand-by function
- Hints and tips
- Care and cleaning
- Troubleshooting
- Consumption values
Filling the detergent and additives
SOFTENER
WASH
PREWASH
PREWASH - Compartment for prewash
phase, soak programme or stain remover.
The prewash and soak detergent is added at
the beginning of the wash programme
WASH - Compartment for washing phase.
SOFTENER - Compartment for fabric
softener and other liquid treatments (fabric
conditioner, starch).
- Maximum level for quantity of liquid
additives.
- Flap for powder or liquid detergent.
Follow the product
manufacturer's recommendations
on quantities to use and do not
ever exceed the mark in the
detergent dispenser drawer. To
measure out the right quantity of
the detergent, see more details in
"Degrees of water hardness". Any
fabric softener or starching
additives must be poured into the
compartment before starting the
wash programme.
After a washing cycle, if
necessary, remove any detergent
residue from the detergent
dispenser drawer.
Pull out the detergent
dispenser drawer until
it stops.
Pour the detergent into the WASH
compartment or in the appropriate
compartment if it is required by the selected
programme/option.
For powder
detergent: ap
turned upwards.
For liquid detergent:
ap turned
downwards.
With the ap is in the
position for liquid
detergent:
• Do not use
gelatinous or thick
liquid detergents.
• Do not exceed to
liquid detergent
dose indicated on
the ap.
• Do not set the pre
wash phase.
• Do not set the
delay start
function.
Pour fabric softener
into the compartment
marked (do not
exceed the
mark).
ENGLISH 21










