User Manual

The appliance automatically adjusts the
programme duration to the load to
achieve perfect washing results in the
minimum possible time.
Pausing a programme and changing
options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause
button.
The related indicator ashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
button again.
The washing programme continues.
Cancelling a running programme
1. Press the button On/O to cancel the
programme and to deactivate the
appliance.
2. Press the button On/O
again to
activate the appliance.
If the AutoAdjust System has
completed and the water lling
has already started, the new
programme starts without
repeating the AutoAdjust
System. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of cancelling:
1. Rotate the programme knob to the "Reset"
position .
2. Wait for 1 second. The display shows .
Now, you can set a new washing
programme.
Opening the door
Warning! If the temperature and
level of the water in the drum are
too high and/or the drum is still
rotating you should not open the
door.
Adding garments. It is
recommended to add garments
until the is on.
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator .
1. Touch the Start/Pause button.
In the display the related door lock indicator
goes o.
2. Open the appliance door. If necessary,
add or remove the garments. Close the
door and touch the Start/Pause
button.
The programme or the delay start continues.
The door can be opened when the
programme is completed, or set the
programme to drain the water and
then touch the Start/Pause button.
End of the programme
When the programme has nished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Start/Pause button
goes o.
The door unlocks and the indicator goes
o.
1. Press button On/O to deactivate the
appliance.
After ve minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end
of the previous programme. Turn
the programme knob to set a new
cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser drawer slightly ajar to prevent
mildew and odours.
ENGLISH
23