User Manual
Table Of Contents
- Contents
- Safety information
- Safety instructions
- Product description
- Technical data
- Inspection check list
- First use
- Control panel
- Programmes
- Settings
- Daily use
- Activating the appliance
- Loading the laundry
- Filling the detergent and additives
- Setting a programme
- Starting a programme
- Starting a programme with the delay start
- The AutoAdjust System load detection
- Pausing a programme and changing options
- Cancelling a running programme
- Opening the door
- End of the programme
- Draining water out after end of cycle
- Stand-by function
- Hints and tips
- Care and cleaning
- Troubleshooting
- Consumption values
Technical data
Product type Built in - Washing Machine
Dimensions Width (cm) 59.6
Height (cm) 81.9
Total depth (cm) 55.3
Water supply pressure
1)
Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
1) If the pressure in your area is lower or higher, please contact your Authorised Service Centre.
Information on the electrical connection, voltage and overall power is given on the
rating plate, on the inner edge of the appliance door.
Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are compatible
with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any other
appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service
Centre.
The manufacturer does not accept any
responsibility for damage or injury through
failure to comply with the above safety
precaution.
Inspection check list
Warning! Refer to Safety
chapters.
Please follow the inspection check list before
using your appliance.
ENGLISH 9