User Manual

11 ENGLISH
What to do if...
If there is a fault, first try to find a solution

solution to the problem yourself, contact an



according to the Assembly instructions, the
visit from the Authorized Service Centre
technician may not take place free of

Before contacting the Authorized Service Centre:




Centre, clearly explaining the problem and specifying:
• the type of fault;
• the model;

PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable The appliance is not correctly installed
 
 
Appliance is not in horizontal
position
The appliance is not correctly installed
 
 
Performance in terms of oil cap
ture are not satisfying
   

  
as described in the user manual
 
The appliance is not correctly con
nected
Verify that the main cable is connected
to the motor group or the plug is con
nected to the socket
   The LED is broken
  
  
Noise of hood is higher than

   
small, causing a pressure drop and
  
 
 
Product is installed in recirculation

Product in recirculation mode(and
  
higher noise than a product in extra

More than one bend in the ventila

If the exhaust system in the build
ing has multiple bend in or a long
distance, this can increase the noise of
