INSTRUCTION MANUAL 4 in 1 Hybrid Camera MODEL ICD-879S OUTDOOR USE WARING WARNING – TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. e co s The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. produ ct Ikegami Electronics (U.S.A), Inc.
Thank you for choosing this Ikegami 1/2” 4 in 1 Hybrid Camera. Please read this Instruction Manual carefully to keep your Ikegami camera at peak performance for longer service period. This unit is a cube-type 1 CMOS color camera and making use of a 1/2” sensor.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) CAUTION - These servicing instructions are for use by qualified service personnel only.
1. Handling Precautions • Do not expose the internal mechanism of the camera in a water-splashed or highly humid environment. • Do not use the camera where the ambient temperature drops below -10°C or rises above +50°C. The images and component parts may be adversely affected or the camera may not function correctly.
3. Features (1) Ultra Low Light (Ultra High Sensitivity) The use of 1/2” image sensor makes it easy to watch in dark environments. (2) Wide Dynamic Range The WDR function provides for very effective compensation of high light and dark areas in screen. This situation may occur generally outside or viewing from indoor to outdoor scenes. Even in large light fluctuations, bright-and-dark subjects can be captured and viewed clearly with a natural appearance.
4.
① Lens mount (CS mount) This is used to mount the lens on the camera. Many types of CS mount lens can be attached. ② Back focus lock screw After completing the flange back adjustment of the camera, use the supplied Allen wrench to tighten the screw until it is fully fixed. ③ Holder mounting screw holes These holes are used to install and fix the camera on the camera mounting or bracket. They can be also applicable to general use tripods which have a quarter inch thread.
⑤ Video output terminal (VIDEO OUT) To be used to give out the video signal. Connect this to the video input terminal of a monitor, switcher etc. (To be terminated with 75-ohm impedance.) ⑥ Power indicator (POWER) The LED indicator stays on in green while the camera power is on. ⑦ DC12V/AC24V power input terminal Keep the input power at DC10.5-15.0 V or AC24V±10%. * This installation should be made by a qualified service person and should conform to all local codes.
5. Operating Procedure 5-1. User Setup This camera is provided with user setup function for picture quality, and camera ID. The setup menu is a tree type on-screen-display. When installing the camera it is possible to set up the various functions. 5-2. Names and functions of the setup buttons U D R L E SET UP U L R D To select setup parameters (up and down) To change setup parameters To get in or get out to setup mode, and to enter and execute procedures. E 5-3.
5-3-1. MAIN MENU When the OSD menu is launched, you are presented with the adjacent opening screen. A menu option followed by a indicates the presence of a sub-menu. Options set to OFF will not show a until set to ON. Use RETURN to the previous menu. MAIN MENU EDGE DET EXPOSURE BACKLIGHT DAY&NIGHT WHITE BAL DNR ADJUST MOTION SYSTEM EXIT OFF WDR AUTO MIDDLE OFF (1)EDGE DET This function emphasizes the edges of the image. ① LEVEL - It adjusts edge level.
(2)EXPOSURE It selects Lens Mode, Brightness, Shutter speed, Sens-up and AGC Gain. ① LENS - DC or Manual selection. ② BRIGHTNESS - Sets the level of the overall. ③ SHUTTER - Auto, Manual, FLK selection, 1/30~1/30K. Set this on to reduce the exposure time of each image. This can be used to reduce blur in images with fast changing content. FLK mode use this when flicker is observed in the image under fluorescent lighting. ④ SENS UP - Slows frame rate and increases low light sensitivity.
(4)DAY & NIGHT Selecting Day or Night is available. ① AUTO - The image is automatically switched between high-quality color image for the day and highly-sensitive monochrome image for the night. ② COLOR - Fixes the camera in color mode. ③ B/W - Fixes the camera in monochrome mode. ④ EXTERN - This mode which forcibly switches the Day/Night mode using an external input. (5)WHITE BALANCE Setting a white balance is available. ① AUTO The camera automatically samples the image for optimum white balance.
(6)DNR(Digital Noise Reduction) This function is used to improve the picture quality by filtering the noise which is generated under low light conditions. (7)ADJUST Color gain, sharpness, gamma, mirror, flip, D-zoom, ace, defog, shading and privacy are available. ① COLOR GAIN - It adjusts the color intensity. ② SHARPNESS - It adjusts the edge intensity of the video. ③ GAMMA This function is for compensating the saturation and brightness of the images shown on the display.
(8)MOTION This function detects and dispalys the object in motion. ① DET WINDOWS Select and set up to 4 motion areas. ② SENSITIVITY Level control. ③ TEXT ALARM Display “Motion Alarm” on Screen.
(9)SYSTEM ① COMM Set com port and speed. ② OUTPUT FRAME RATE, FREQ, CVBS_MODE, ANALOG MODE Selectable. ③ IMAGE RANGE Used to adjust black level in dark sceen. ④ COLOR BAR Vertical flip of image. ⑤ LANGUGE Select from 5 languages.(ENG, CHN, CHN(s), JPN, KOR) ⑥ CAMERA TITLE The screen can display 8 characters. ⑦ RESET It returns to the factory default.
6. Warranty and after-sale service A warranty accompanies this product. Read and fill out the warranty card that you have received at your dealer. Keep this card in a safe place. ● Please consult Ikegami Electronics (U.S.A.) Inc. or Ikegami Electronics (Europe) GmbH or your dealer for full warranty information. Your dealer will repair or replace free of charge within the warranty period according to the warranty coverage.
7.
(25) Power Requirement: AC 24 V±10%(50/60Hz) DC 12 V (+10.5V ~ +15V) (26) Power consumption: 4.0W (27) Outer dimensions: 52(W)×52(H)×55(D) mm (no protrusion included) (28) Weight: Approx.
8. External Appearance 2-1/4”-20UNC 6.
PUSH SET FOR A WHILE SETUP MENU DNR WHITE BAL DAY&NIGHT BACKLIGHT EXPOSURE EDGE DET L RU D E +SET +SET TOP L RU D E OFF LOW MIDDLE HIGH +SET +SET COLOR B&W EXTERN +SET WDR +SET +SET BLC AUTO +SET +SET HLC OFF OFF ON L RU D E MODE 3RD L RU D E POLYGON AUTO EXT AUTO PRESET MANUAL 0-10 DELAY AWB NOT USED NOT USED HIGH LOW NOT USED 0-20 0-20 0-10 MIDDLE HIGH LOW ANTI-SAT ANTI-SAT EXTERN SW ANTI-SAT AGC-THRES AGC-MAGIN DELAY WEIGHT OFF ROI MODE BOX LINE FRAME WDR MOD
EXIT SYSTEM MOTION ADJUST +SET TOP OFF +SET +SET CANCLE +SET SAVE ON TEXT ALARM RESET CAM TITLE LANGUAGE COLOR BAR +SET +SET OUTPUT IMAGE RANGE +SET COM SIGNAL OUT 2DN OFF ON ENG/CHN/CHN(S) JPN/KOR OFF +SET RIGHT UP LEFT DOWN +SET 0-10 ON OFF ON OFF OFF ON OFF ON PRIVACY +SET +SET OFF ON SHADING DET WINDOW SENSITIVITY MOTION OSD +SET OFF ON DEFOG FULL COMP USER ANALOG_MODE FREQ CVBS_MODE FRAME SET DONE CAM ID BAUDRATE DET H_POS DET V_POS DET H_SIZE DET V_SIZE WIN
■ Ikegami Electronics (U.S.A.), Inc. 300 Route 17 South, Mahwah, NJ 07430, U.S.A. Phone: (201) 368-9171, FAX (201) 569-1626 www.Ikegami.com or ■ Ikegami Electronics (Europe) GmbH Ikegami Strasse 1, D-41460 Neuss, Germany Phone : 02131-123-0, FAX 02131-102820 www.Ikegami.de ■ Ikegami Electronics U.K. Office: Unit E1, Cologne Court, Brooklands Close, Windmill Road, Sunbury-on-Thames, Middlesex, TW16 7EB, U.K. Phone:01932-769700 FAX 01-92-769710 www.Ikegami.co.uk Ikegami Electronics (U.S.A), Inc.