- IkeLite Video Cases Instructions

ManualsBrandsIkelite ManualsCamcorder Accessories12

IIKKEELLIITTEE VVIIDDEEOO CCAASSEE

SSUUPPPPLLEEMMEENNTTAALL IINNSSTTRRUUCCTTIIOONNSS FFOORR

 SSoonnyy HHDDRR SSXX 

This supplemental set of instructions describes additional features specific

to your housing model Prior to testing the system in the water please read

this supplement along with the general instruction manual to become familiar

with its features and functions

Ikelite Video Cases are slightly negative in salt water for stability This

housing has been water pressure tested at the factory and has a working

depth of m 

HHOOUUSSIINNGG CCOONNTTRROOLLSS

________________________________

• Power OnOff  Mode

• StartStop

• Snap Shot  Photo

• Power Zoom

• LCD Screen Control 

• LCD Screen Control 

• LCD Reversing Circuit OnOff

• LCD Screen Control 

• Focus Lock

MMAAIINN OORRIINNGG __________________________________

Orings last several years if properly

maintained Control seals should not need to

be replaced as long as the control shafts are

kept clean and lightly lubricated

Base

Power Zoom

Port

Power

Touch

Pad

Touch Pad

Touch

Pad

Lid Snap

Focus Lock

Mirror

#6039.94 Sony HDR SR11, 12

Bottom Bar

On/Off

for Reverse

Circuit

Start/

Stop

Snap Shot

PP RR EE PP AA RR AA TT II OO NN

PPAACCKKAAGGEEDD WWIITTHH HHOOUUSSIINNGG

____________________________________________________________________________________________

• External URPro Color Filter

• Internal Lens Shade

• Silicone Lubricant

CCOOLLOORR FFIILLTTEERR

__________________________________________________________________________

The installation and usage of the external URPro

color filter is described in the general instruction manual

LLEENNSS SSHHAADDEE

______________________________________________________________________________

The internal lens shade helps block light reflection

refraction caused by the interaction of the external color

filter and the port

Carefully thread the lens shade on the front of the

camera lens The lens threads are very fine;

DDOO NNOOTT

cross thread It should screw on

very easily If it is difficult to turn you are cross threading

Completely thread the lens shade into the camera to avoid any potential

clearance or sealing problems when the camera is installed and the housing is sealed

LLCCDD MMOONNIITTOORR  EEXXTTEERRNNAALL MMIIRRRROORR

____________________________________________________________________________

The cameras LCD monitor can be viewed from the rear of the housing using the

external mirror featured on the side of the housing

Open the LCD monitor on the camera rotate ° and then press it back against

the side of the camera The external mirror is hinged so that it can be opened to reflect

the image from the cameras LCD monitor for viewing from the rear of the housing

During transportation please remember to close the mirror by pressing it against

the side of the housing or lid snap

BBAATTTTEERRYY AANNDD TTAAPPEE

____________________________________________________________________________________________________________

Install a fully charged Sony battery on the camera:

Sony NPFH NPFH NPFH NPFH

Other brand batteries may not fit inside the housing

Make sure you have loaded an appropriate digital cassette tape in the camera

OOPPTTIIOONNAALL WWIIDDEE AANNGGLLEE LLEENNSS

________________________________________________________________________________________

The housings port accepts optional mm threaded waterproof WideAngle lenses

such as the Ikelite  W Epoque DCL and Inon UWL Type  These

waterproof lenses secure to the outside of the lens port

Should you elect to use an optional waterproof lens carefully thread the lens on

the front of the lens port on the housing The lens threads are very fine; DO NOT cross

thread It should screw on very easily If it is difficult to turn you are cross threading

IINNTTEERRNNAALL WWIIDDEEAA

NNGGLLEE LLEENNSS OOPPTTIIOONN ________________________________________________________________________

Special ports are available for use with the Raynox HD Pro high definition

wideangle lens optional ports sold separately as dome port  or flat lens port

 Raynox HD Pro lens not included Lens

nnoott

available for purchase

through Ikelite

EEXXTTEERRNNAALL WWIIDDEEAA

NNGGLLEE PPOORRTT OOPPTTIIOONN ________________________________________________________________________

The Ikelite  WP is a complete unit no additional lens or port is required

The Wide Angle Port replaces the housings original port and cannot be removed and

replaced underwater The WP is useable above water for up to  degree field of

view underwater for up to  degree field of view exact angle of coverage varies with

camera model

External

Color Filter

Internal

Lens Shade

Summary of content (2 pages)

PAGE 1
IKE L IT E VI D EO CA SE PREPARATION P AC K A GE D W I T H H O U S I N G _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ S U P P L E M E N T A L I N S T RU C T I O N S F O R • External UR/Pro Color Filter • Internal Lens Shade • Silicone Lubricant #6 03 8 .
PAGE 2
I M A G E R E V E R S I NG C I R C U I T _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The image reversing circuit is mounted inside the housing. The circuit reverses flips the image and words on the LCD screen so that when the image is reflected in the external mirror, it appears correct left-to-right. Plug the reversing circuitry into the AV Out port on the camera before securing the camera to the tray and then slide the camera and tray inside the housing.