Instruction manual

13
##55661111..0011__FFlliipp sslliiddee HHDD VViiddeeoo--0011--00771100
GGeenneerraall TTiippss
1. Before placing your camera in the housing, it is a good idea to
immerse the closed housing in a bucket or rinse tank to make
sure it is watertight.
2
. Due to the power required to operate the camera and LCD
screen, it is a good idea to start each dive with a fully charged
camera battery.
3. As soon as you enter the water, take a moment and check the
h
ousing to see that it is properly sealed.
4. Next, check to see if there are any bubbles on the face of the
lens port. If there are, take your finger and remove them. If
there are bubbles on the lens port they can produce soft focus
s
pots in your video.
NNOOTTEE::
Fogging of the port glass may occur due to a variety of
environmental factors. To prevent fogging issues, always
a
ssemble the housing in a cool, dry area, and keep the housing
out of direct sunlight. If fogging persists, insert a fresh dessicant
packet inside the housing before each day of diving. Dessicant
packages are not available from Ikelite, however most camera
stores carry them.
VViiddeeoo TTiippss
The number one rule in underwater videography is to eliminate
as much water between the camera and subject as possible. Get
as close as you can to the subject, then use the zoom if
necessary.
HHooww ttoo ccoonnttaacctt IIkkeelliittee iiff nneecceessssaarryy
E-mail: [e-mail]
Phone [phone]
Fax [phone]
RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
((oouuttssiiddee tthhee UUnniitteedd SSttaatteess))
For the separate international customs documentation form that
you complete to accompany the shipment, please state or
designate that the enclosed products were originally manufactured
in the USA and are being returned to the manufacturer for repair
service. Value of the equipment listed for customs purposes should
be zero.
IIkkeelliittee UUnnddeerrwwaatteerr SSyysstteemmss
5500 WWeesstt 3333rrdd SSttrreeeett
IInnddiiaannaappoolliiss,, IINN 4466220088 UUSSAA
IIkkeelliittee LLiimmiitteedd WWaarrrraannttyy
All Ikelite products are warranted against any manufacturing
defects for a period of one year from the original date of purchase.
Defective products should be returned prepaid to Ikelite. Ikelite
will, at its discretion, repair or replace such products, and will
return to customer prepaid. All other claims of any nature are not
covered. Housing is pressure tested and warranted to 200’ (60m)
maximum underwater depth. Except as mentioned above, no other
warranty expressed or implied, applies to this Ikelite product
..
RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
Ikelite is most interested in performing any service to ensure that
all products perform as intended. Evidence of purchase date must
be provided to obtain warranty service.
No prior authorization is required. You may return directly to us or
through your dealer. Please include a brief description of the
problem, any relevant e-mail correspondence, and/or instructions
o
n what you want us to do. Always include name, shipping address,
e-mail address, and phone number inside of the package.
You may also want to insure the package.
Send Postage Pre-Paid to:
Ikelite Underwater Systems
A
TTN: Repair Dept.
50 West 33 Street
Indianapolis, IN 46208 USA
No reimbursements for return freight will be issued.
14
15