Video Case Instructions

BBAATTTTEERRYY AANNDD TTAAPPEE
_________________________________________________________
• Install a fully charged Canon battery on the camera:
Canon NBLH BPL
• Other brand batteries may not fit inside the housing
• Make sure you have loaded an appropriate digital cassette tape in the camera
FFIINNAALL PPRREEPPAARRAATTIIOONN
________________________________________________________
The program selector on the camera
MMUUSSTT
be in the
PP
position for the focus lock
button to function
The cameras auto focus feature is utilized underwater For best results move
in close to your subject and use the wide angle range to shoot thru as little water as
possible The full zoom range is accessible underwater Chart shows recommended
initial settings underwater
WWHHIITTEE BBAALLAANNCCEE
____________________________________________________________
Initially set the white balance to Auto Use the touch screen controls on the
housing to change white balance
CCoolloorr FFiilltteerr::
When using the color filter during the day set camera white balance
to Indoor for  foot depth For  foot depth set white balance to Outdoor
VViiddeeooLLiittee::
When using optional Video Lite at NIGHT set the camera white balance
to the Indoor position During the DAY use the Outdoor setting for subjects beyond
 feet and the Indoor setting for closer subjects
CCAAMMEERRAA SSEETTTTIINNGG
Power OnOff  Camera On
Zoom Lever  Wide Angle Setting
Focus  Auto Mode
Exposure  Auto Mode
Lens Cover Switch  Open
II NN SS TT AA LL LL AA TT II OO NN
CCAAMMEERRAA TTRRAAYY
_________________
The camera mounts to the tray
which extends from the back plate of the
housing
DDOO NNOOTT
remove the tray from
the back plate
Position the camera against the two
stabilizing pins on the tray and secure
camera with the tripod mounting bolt
The camera should fit easily on the tray
and should be parallel with the sides
of the tray
IINNSSEERRTTIINNGG TTHHEE CCAAMMEERRAA
___________
Check that the oring is clean and
properly positioned on the lip of the clear housing back plate
Once the camera is mounted to the tray as shown above pull the housing
controls out to provide clearance for installing the camera Slowly slide the camera
tray with camera mounted back into the housing As the camera slides into the
housing make sure the camera lens fits into the port recess in the front of the
housing
DDOO NNOOTT
force this installation; the camera and tray should slide easily into
place so the housings back plate oring is resting against the main housing body
In this position the lid snaps can be positioned over the lid hooks on the housing
back plate and snapped into position to seal the housing
HHOOUUSSIINNGG CCOONNTTRROOLLSS
________________________________________________________
Slide the housing controls back in place making sure they properly align with the
camera functions
Operate each control to see how it works with the camera Some controls such as
startstop will be used frequently Other controls may seldom be utilized Refer to
your camera owners manual for the proper function of each camera control Look
thru the back to be sure that you can see into the viewfinder
When using the housing controls especially the startstop do NOT use excessive
force because you could damage the camera
CCAAUUTTIIOONN
Remove the lens cap and cord from the camera
Otherwise the cord may interfere with the housing seal
If the housing controls are not properly positioned
they could interfere with the housing seal
IIKKEELLIITTEE UUNNDDEERRWWAATTEERR SSYYSSTTEEMMSS
 West rd Street • PO Box  • Indianapolis IN  USA

Email: ikelite@ikelitecom • wwwikelitecom

Camera Mounting Bolt
Camera Tray
O’ring
SuperEye
Back Plate
Stabilizing
Pins