User's Manual
11
Remote Control Instruction
Basic Operations
Turn on the panel
Step 1: Use 100V-240V 50/60Hz AC as the panel power supply. The power plug is fully plugged in
and the outlet ground wire is well connected.
※ The type of power cord supplied may differ from that illustrated depending on your region of purchase.
Step 2: Turn on the Rocker switch (back side of the panel, next to power outlet). Enter standby state,
the power indicator turns to red color.
Step 3: Press the "Power" button on the front panel or the remote control standby button to turn
on the panel. The OPS (built-in computer) will be turned on together. The power indicator will be
blue after turning on.
Turn off the panel
Step 1: Press the PC power to turn of the OPS in advance.
Step 2: Press the "Power" button on the front panel or the remote control standby button to turn
off the panel. The power indicator will be red after turning off.