User's Manual

Step 3: Turn off the Rocker switch or plug off the power cable.

Notices:

 Be sure to turn off the PC power before turning off the power, otherwise it may damage the

panel.

 Be sure to turn off the Rocker switch or unplug the power cable, otherwise it may damagethe

panel.

 Do not switch the machine on and off in a short time, otherwise it may damage the panel.

 OPS installation

Step 1: Plug the OPS PC into the OPS interface of the panel;

Step 2: Screw the two screws on the OPS to fix it.

Notice: The OPS computer does not support hot plugging.

Be sure to turn off the panel before plugging it in or out.