User's Manual
2
Attention and Safety Warnings
Attention: Please read the instruction carefully and put it in a convenient position. Please obey the following installations and
operating attentions.
1.
The safety and operation description should be read carefully before operating and using the product. Please keep the
instruction for the future using.
2.
All the warning signs in the Product Operation Guide should be followed.
3.
Please turn off the power and extract the plug when there is abnormal sound of smell in the panel, do not use it when it is
confirmed to be abnormal, and call the product servicemen to maintain it.
4.
If the panel is not used for a long time, please turn off the power and extract the plug, the connection between the panel
and antenna should be cut off in thunderstorm season.
5.
Please do not watch monitor on thunderstorm day, and unplug the power plug and antenna before the thunderstorm
comes to prevent the thunder strike.
6.
Flammables and explosive like candle, electric furnace and bulb cannot be put on the panel or close to it, which can avoid
the accident on the panel.
7.
Prevent the liquid and metal entering in the panel, do not use it when there is liquid or metal entering in the panel, and call
the professionals to solve it timely.
8.
Do not use the chemical reagent to wipe the panel, which may make the shell spoil or damage the painted surface. Wipe it
with the dried cloth ten minutes later from turning off the panel when there is dust or dirt on it. The display screen can be
wiped by clean mull. Unplug the panel plug from the wall mounted power outlet before the cleaning. Do not use the liquid
detergent or spray detergent.
9.
Look out water and humility. Do not use the panel in where there is water or is close to water. Such as: bathroom,
washstand, kitchen, water channel, washtub, and places nearby the humid basement or swimming pool, etc.
10.
The panel shouldn’t be suffered from water drop or water spatter, and the materials like vases which are full of water
cannot be put on the panel.
11.
The plug should be easy to insert, extract and is earth-connected. The product can be equipped with a polarized
multi-finger AC plug (the plug has two multi-fingers in different width, and the plug can be inserted in the power outlet in one
direction, which is another safety feature of the plug). Try it in another direction if you cannot insert the plug into the outlet.
Connect the electrician to change the outlet if you still cannot insert it in, please do not damage the safety features of the
polarize plug. Additional warning: the product is equipped with a three-wire earth connection plug which possesses an earth
connection pin, and can only inset in the earth-connected power outlet.
12.
Do not put the panel on the unstable trolley, frame, bracket or desk, and otherwise it may make the panel turnover. Move
it carefully when putting the product on the trolley. Sudden stop in a high speed, too much strength or rough surface may
cause the turnover of trolley and the panel.
13.
The channel and hole on the equipment is for ventilating, which can ensure the panel operate reliably and prevent the
overheating. Do not cover papers, tablecloth or curtains on the ventilating hole which may disturb the ventilating. Ensure
there is space around the panel for the adequate ventilating.
14.
The panel can be supplied with power type and power voltage specified on the label. Please contact the product agency
or local power supply company if you are not sure the power type and voltage of your family.
15.
The power cable in the accessories of monitor is CCC-ALL (with earth protection), ensure the earth terminal of the wall
outlet is well when installing it. The power wiring shouldn’t occupy the access to avoid treading, and should keep away from
the place may make it pressed by other materials.
16.
Do not put any type sundries in the panel through any hole, and otherwise they may touch the dangerous voltage point or
extruding part, and cause the fire or thunder strike.
17.
Do not repair the panel arbitrarily. Open or take apart the cover arbitrarily may make you face dangerous voltage or other
risks. Please contact the servicemen to solve it if there is any maintenance matter.
18.
Follow the operation instructions provided by the manufacturer when installing the panel, and use the installation fittings
commanded by the manufacturer.