User's Manual

5
 Loading Bearing
The user could install the panel on the wall or mobile stand according to their own needs.
When using mobile stand installation, please choose the one from the manufacture (Optional
accessories). If you purchase yourself, be sure the stand could bear at least the 4 times weight of
the panel and put it stability.
When using a wall-mounted installation, the mounting surface should be sturdy and strong enough
to carry, and should not be less than 4 times the actual weight of the panel. When the installation
surface is a wall or a roof of a building, it must be solid brick, concrete or an installation surface
equivalent to its strength. If the installation surface is a loose material installation surface (such as
old-style house brick, wood, solid brick, etc.), and metal, non-metallic structure, or the installation
surface decoration layer is too thick, its strength is obviously insufficient, it should take appropriate
reinforcement And support measures to prevent potential safety hazards.
 Heat Dissipation
Requirements
Safety distance between the panel and the mounting surface (mm)
Monitor power
Left and Right
Top
Bottom
Back
≧100W
200
200
200
100
Notice
When wall-mounted, the safety depth of the wall-bolt should be greater than 10mm;
Make sure not to block the ventilation holes.
Mounting
Instruction