Installation Manual

www.ikkegol.com
- 5 -
Support: [e-mail]
problem 1 solution as above.
3.If it still failure, please open a new txt file, and press the USB foot switch, to see there is " B" can be type or not, we
setting this switch default key is" B".
4. If it can be type " B" ,please initialization it then set it again;
 Problem 5: Cannot works in Mac
Reason: you'll need to install the driver on a Windows computer and configure it there. Once set, your mappings
will be saved to the device's firmware and you can use it with almost any computer without installing drivers.
 Problem 6: Had configure it in window computer, still cannot works in Mac
1.Please right click the hard drive Properties, does your computer have been recognized by your Mac or not,
2.If you have configure in windows, and your Mac have been recognized, it maybe your device have been some
version not support as different keyboard format between windows and Mac, please installing a program called
Karabiner Elements, add a new keyboard override, make sure to set it to only work on the foot pedal device, and
remap it to whatever you want. And normally it without changing anything else on the Mac after you install
Karabiner Elements.
 Problem 7: Chinese software
We have 3 version for this software: English Version, Chinese Version, Japanese Version, if you install it in
Chinese Version, just change it and select the English version at the right corner drop menu.