User Manual

Problem 4: Cannot program or map value or set to fail
Problem 5: Cannot works in Mac
Reason:
1. Software version and device version do not match;
2. Anti-virus software.
Solution:
1.close the Anti-virus software and install older version software, please
download the older software at : http://software.pcsensor.com or contact
us at : for get correct software. [e-mail]
2.Please check have you active the .NET3.5 in your system, regarding how to
install the .NET3.5, please see the problem 1 solution as above.
3.Ifitstillfailure,pleaseopenanewtxtfile,andpresstheUSBfootswitch,to
seethereis"B"canbetypeornot, we setting this switch default key is" B".
4. If it can be type " B" ,please initializationit then set it again;
Reason: you'll need to install the driver on a Windows computer and
configure it there. Once set, your mappings will be saved to the device's
firmware and you can use it with almost any computer without installing
drivers.
Instruction Manual
Making Your Digital Life Easier
12