User manual Hitec RED 6

10
7. Transfer this screw to the other stick unit to disable the spring tensioner.
8. Check the operation of the throttle stick and once happy, ret the rear of
the transmitter case.
9. Re-t the six self-tapping screws taking care not to over-tighten.
10. Now move the mode selection switch to the Mode 1 position.
Connection Diagram
Use these diagrams to connect the KA-6 for I.C. and electric powered aircraft.
Switch to
MODE 1
F/S
B
6
5
4
3
2
1
2.4GHz
6-Channel Receiver
F/S
B
6
5
4
3
2
1
2.4GHz
6-Channel Receiver