User manual Hitec RED 6

12
Failsafe
In the event of signal loss the KA-6 is equipped with a fail-safe function which
operates across all 6 channels and must be set independent of the pairing
process. To activate the fail safe setting, turn ON the transmitter and receiver
and ensure they are paired.
Press and hold the fail safe (F/S) button on the receiver. The LED will
extinguish, then ash. When the LED lights solid red, turn the receiver’s
power OFF and then ON. The fail safe is now set. You can test the fail safe
function by turning OFF the transmitter and checking that the throttle and
ying surfaces move to their pre-set positions.
Servo Reverse
If, when you move a joystick in one direction, the control surface moves in the
wrong direction, then the control requires reversing. This is very quick and
easy to do. Just ip the switch from Normal to Reverse on the channel you
wish to reverse. Check that the control surface’s direction has been reversed.
Throttle
Low
Reversing
Switches