User manual Hitec RED 6

8
When you are happy with the stick spring tension, you may carefully reinstall
the rear cover ensuring that you haven’t trapped any wires. Replace the six
self-tapping screws taking care not to over-tighten.
Changing the transmitter to Mode 1
As standard, the transmitter is factory-congured to Mode 2 (with the throttle
on the left hand stick). The transmitter can be changed to Mode 1 (with the
throttle on the right hand stick).
MODE 1
Throttle
High
Throttle
Low
Down
Elevator
Up
Elevator
Left
Aileron
Right
Aileron
Left
Rudder
Right
Rudder
MODE 2
Throttle
High
Throttle
Low
Down
Elevator
Up
Elevator
Left
Aileron
Right
Aileron
Left
Rudder
Right
Rudder
MODE 1
Throttle
High
Throttle
Low
Down
Elevator
Up
Elevator
Left
Aileron
Right
Aileron
Left
Rudder
Right
Rudder
MODE 2
Throttle
High
Throttle
Low
Down
Elevator
Up
Elevator
Left
Aileron
Right
Aileron
Left
Rudder
Right
Rudder