User Manual

70 MINI USER’S MANUAL
70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso. 15
70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI reserves the right to modify this information without prior notification.
6.4 ID RELEASING (LIB ID) (TRANSMITTER MODELS:T70MG10;T70MH3D;T70MH3;T70MH2)
6.5 AUTO TEACHING MODE (AUTO ID) (TRANSMITTER MODELS:T70MG10;T70MH3D;T70MH3;T70MH2)
Note: In two steps pushbutton keypads the special functions are activated pressing the first
step.
DURING THE ID RELEASING PROCESS THE ORANGE LED BLINKS AND THE BUZZER IS ACTIVE. ID RELEASED PROCESS
FINISHED: LED OFF and BUZZER OFF.
T70MH3D / T70MH3 / T70MH2
It allows releasin
g
the receiver’s ownershi
p
of the current workin
g
transmitter.
1) With the transmitter switched off, press “ON/STOP”.
Transmitter in stand
-
by mode or LOW CONSUMPTION mode
2
)
To enter in LIB ID mode
,
p
ress simultaneousl
y
“UP” and “START” functions.
+
T70MG10 TRANSMITTER MODEL
It allows releasin
g
the receiver’s ownershi
p
of the workin
g
transmitter.
1
)
With the transmitter switched off
,
p
ress “ON/OFF”. Transmitter in stand-b
y
or LOW CONSUMPTION mode.
2
)
To enter in LIB ID mode
,
p
ress simultaneousl
y
“4” and “10” functions.
+
DURING THE ID RELEASING PROCESS THE ORANGE LED BLINKS AND THE BUZZER IS ACTIVE. ID RELEASED PROCESS
FINISHED: LED OFF and BUZZER OFF.
T70MG10 TRANSMITTER MODEL
The orange LED switches on-off when every password value is pressed.
At the validation process the orange LED blinks, indicating that the new values are being recorded into the receiver.
Once the operation has finished the orange LED switches off and the transmitter switches to stand-by or LOW CONSUMPTION mode.
It allows to re
g
ister in the receiver’s database a new transmitter’s ID
(
maximum = 32 ID
)
+
1
)
With the transmitter switched off,
p
ress “ON/OFF”. Transmitter in stand-b
y
or LOW CONSUMPTION mode.
2
)
To enter in AUTO ID mode,
p
ress “9” and “10” buttons simultaneousl
y
3
)
Introduce the “default
p
assword” : “8-8-8-8-8” -> “10” to validate.
Keep pressed until the orange LED lights continuously.
PASSWORD
(
DEFAULT
)
► ► ►
>
VALIDATE