User Manual

1 DESCRIPTION
The RADS11 and RADF13 push-button transmitter type, radio remote control systems,
are designed for the remote control of hoists and cranes, and are particularly suitable for
applications when the operator needs to be able to choose the best location from which
to carry out an operation.
The system consists of a transmitter for selecting commands and a receiver that is
connected to the electrical system of the machine to be operated. The system also comes
with a battery charger and two rechargeable batteries.
The main specifications for RADS11 / RADF13 systems are:
RADS11 / RADF13 Systems In EU countries In North America
Frequency band 869.7 to 870MHz 902 to 928MHz
Baud rate 7200 bps
Channel separation 12.5 KHz 25 KHz
Channel Occupation 7.2 KHz
Modulation FM (GMSK)
Response Time 100 ms
Temperature range -20ºC to +65ºC -4F to 150F
The RAD-TS and RAD-TF transmitters
Transmission power <5 mW
Protection IP65 NEMA 4
The RAD-RS and RAD-RF receivers
Power supply 48 Vac, 115 Vac, 230Vac ± 10%, 50/60 Hz
Consumption 30 W
Relays 230 Vac/8 A
Protection IP55 NEMA 12
Communication CL20mA (RAD-RF only)
Protection against electric shock Class II according EN50178 (1997)
The BC60K battery charger
Power supply (± 10%) 230 Vac 50/60Hz 115Vac, 50/60 Hz
The BT06K batteries
Voltage 4.8 V
Capacity 700 mAh, NiMH
Charging temperature 5ºC to 35ºC 41F to 95F
Operating Time 12h at 50% RAD-TS model.
8h at 50% RAD-TF model.
RADS11 and RADF13 Users Manual ver1.2.doc
KCI Hoists Corp. reserves the right to modify this information without prior notification.
Page 4 of 20