User's Manual

2. Select firmware package file(*img)

3. Make sure the device under shutdown condition, long press +/- button and don’t loosen until

upgrading start in step 6.

4. Insert the upgrading equipment ( insert one equipment at one time)

5. If it’s first time for upgrading Boxchip device on your computer, press “power” button many

times till the computer prompt for installing USB Driver. Then click next step and selet

LiveSuit→ USB Driver →usbdrv.sys. to install USB driver. If the computer have upgraded

Boxchip device before, no need to install again.

6. After USB Driver installed, computer will prompt “Whether force to formatting?”, select “Yes”.

Then enter into upgrading status. Release +/- button.

7. If it succeeds in upgrading, please pull out the equipment to finish all processes.

8. If it fails in upgrading, please pull out the equipment, and reinsert the equipment after the

equipment restores.

10 Product Specifications

Dimension 193*120*8*10.6mm

Display 7.0 inch, TFT touch-screen display, 800*480

PC connection High speed USB 2.0

CPU Allwinner A13 CPU

RAM DDRIII 512M

Memory 4GB/8GB/16GB/32GB

TF card

1GB-32GB（should buy）

configuration

operating system Android 4.0

Access network Wifi 802.11 b/g/n

Audio parameter SNR

＞=90dB

Music formats MP3, M4A, WMA, APE, FLAC, AAC, MID, WAV, AMR, OGG etc

Video formats RM, RMVB, AVI, MP4, M4V, MOV, 3GP, MKV, VOB, MPG, MPEG, PMP,