LIFE User Manual Robotic vacuum cleaner Model: Ads Max ; 4 Yl LIFE I Wo il www carboniferous
Eh LIFE Dear Customer, Flee ne eT Dds LR RE eee ie a Are late a eT Eg Sel TAR een Crag Please take a few moments to read this manual and get acquainted pet ela oT Th HETTIE felted lic feel gene Stay connected with us on Facebook and twitter to enjoy these exclusive benefits: _ Get support tal rode to your specific robot.
LIFE es | Ads Max contains electronic ports. Do NOT put 1 in water or spay with water. Clean the robot with a dry cloth only. Where to start = Place the charging dock agonist o wal in an open area. Da not put # rear a road oF shes. * Be fare cleaning begins, clear up excessive objects on the floor {eg cables, bar stools, teeter. * Choose MAX mode to dean areas with accumulated dust For best performance + Remove the main brush.
en LIFE Table of Contents Safety Instructions Product Parts Main body and accessories Robot gloomy mw. Charging dock _CLEAN button status sigma Remote control! operating How to Use Getting started... StortPause/Sleep Scheduling Cleaning modes .
LIFE i Safety Instructions Before using the robot, please read and follow the below safety instructions and precautions. » Read through this user manual carefully before using the robot. * Retain this user manual. Any operation that is not described in this user manual may injure the users or cause product damage. WARNING 1. Only certified technicians may disassemble the robot. Users must not disassemble or repair the robot. 2. Use factory authorized adapter only.
en LIFE Safety Instructions 18. Do not use this product when dustbin is full. 17. Do not pace this product in high-temperature environment. 18. The battery rust be removed from the product before it is scrapped. 18. The product must be disconnected from the supply mains when removing the ry. 20. The battery is to be disposed of safety. 21. Use factory-authorized battery only, do not use unmatched battery.
LIFE i Product Parts Main body and accessories HO.
= LIFE Product Parts Sabot anatomy CIf Sensors Nose Wheel Charging Pin Left Brush Fight Brush Battery Cover Left Whee! Right Whee! Main Brush Dustbin Primary Filter Sponge Dustbin Cover += High Performance Fitter , 3 lady iE Dustbin For mom delis, peas visit www interferon com Pr
LIFE i Product Parts Charging dock Signal Light Top Cover Power Supply Socket Charging Pin CLEAN button status signals Robot dates it signally Charging Orange light flashes Charging finished All lights off In selected mode Green light flashes Mai functioning Red light tums solid Low battery Orange light tums solid In cleaning mode Green light tums solid £8 For mind date, please vis www earshot com
en LIFE Product Parts Remote control! operating @* 6" Starting up/Pause « To start dealing in selected mode. » To stop cement cleaning cycle. o To change from sleep mode to selected mode. © Direction Buttons A. "a" Baton » To incense minute ond hour setting in schedule or clock mode. = To move robot forward in selected mode » To stop the robot wham i hits against objects. 8 Button « To decrease minute and hour setting in schedule or clock made. C.
LIFE wg Product Parts © a" Spot To clean specific areas. O° @ "MAX To gormandize vacuuming power. © @[:l To display scheduled time. Q OU To display clock. Note: 1 Place two AAA batteries into the remote control. 2 Remove batteries if the remote control will not be used for a long time.
en LIFE How to Use 1. Getting started 1». Place charging dock on the floor ond plug in adopter. Signal light on charging dock will tum solid. Hate: Put charging dock ageist a wall and remove obstacles about 1 meter on both sides and about 2 meters in front. 1» 2», Display pone! will flash after the power switch (near the power sodded) is turned on. if no command is received, the robot will switch to sleep mode softer 45 seconds) Pete: A. Always keep the power switch on, otherwise the robot will not work. B.
LIFE i How to Use 2. Stort/Pouse/Sleep Sleep mode: robot is not working, light ot [7 button is off and power switch is on. Selected mode: robot is not working, green light ot [5] button flushes. Cleaning mode: robot is working, green light at [5] button tums solid. I>. Starting up A. Mike sure the power switch is on. 8. Press 0) button on robot or 58 button on remote control to start dealing.
en LIFE How to Use 3. Schedule 1> Point the remote control at robot and press @ button to recover robot from sleep mode. You will hear oa beep. 2». Adjust the on remote control to display local ime. A. Press (3) and set time with direction buttons. B. Press (8) again to save the setting. Mote: When scheduling a cleaning cycle, keep the remote control close to mot for better signal reception. 3». Point the remote control at robot, and set tme to start cleaning. 4».
LIFE i How to Use 4. Cleaning mode 1». Auto cleaning In Auto cleaning mess, robot automatically cleans the areas that it can reach. Note: Press [55] button on robot of button on remote control to start Auto cleaning. 25>. Spot cleaning » Press (£2 button on remote control while robot is working. Robot will clean around a circular route and return to Auto Clean mode softer Spot cleaning is finished. » Press (8 button on remote control while robot is in selected mode.
en LIFE APP Download The robot can be controlled by the “HOMELIKE” app. Stan the QR code to install the app on your 10S or Android device.
LIFE i Maintenance 1. Cloning side brushes Clean the side brushes when they get dirty. Replace them if they are damaged. Note When replacing the side brushes, make sure they are installed according to the "L* and "R" marks on both sides of the brush and the base of the robot. 2. Cleaning dustbin and filter Follow the steps below to employ and clean dustbin after sate use. = Take out dustbin and clean dust or debris in the suction opening. « Clean fitter after 15-30 days of use.
a LIFE Maintenance 3. Cliff sensors and auto charging pins Gently clean the sensor lens and charging pins with o soft dry cloth. 4. Nose whee! Make sure the nose whee! is clean and con rotate freely to avoid lowered cleaning performance: {1) Pui! the wheel up and out vertically and clean it. Also check if the gasket is Wom. {2} Male sure the gasket is properly installed after ceiling the nose wheel.
LIFE i + Troubleshooting 1. Table of errors The robot will remind you by beeping or erratic movements when iris rout functioning. Tone Possible Cause What to do « Clean side wheels and 1 beep Side wheels or sie side brushes. brushes issues + Mike sure they can rotate smoothly. 2 beeps | Cliff sensor ar bumper 2 Goa cif sensor. NS ® if the bumper can sensor failure rotate freely 3 beeps | Robot gets stuck Move the robot and restart. o i = Remove main brush.
dn LIFE Troubleshooting 2. Troubleshooting Fault symptoms Possible couches Solutions Make short moves | Hair debris are clogging | » Pull out the front wheel and and circle ground | the front wheel. reeve hair and debris in the a small area cavity and axle. « Reinstate front wheel, and clean it twice o week. Move backward Bumper can't rotate + Reinstall bumper and remove and spin smoothly hair and Deloris. © Make sure bumper oon move backhand forth smoothly.
