APP Connection Instructions A9
APP Download and Connection Downloading the App The robot can be controlled by the“ILIFE Robot" app. Scan the QR code to install the app on your iOS or Android device. Before Wi-Fi Connection Before WiFi setup, Please keep the robot and smartphone as close to the router as possible to ensure the signal strength of WiFi, and make sure Smartphone and robot meet the following requirements. •Smartphone: Your smartphone is connected to a WiFi network (2.4GHZ). Your smartphone is running IOS 10.
Connection Steps Step 1 Step 2 ● Open the app. ● Insert your email address. Tap on"Get verification code". ● Enter the verification code. ● Tap on "Quick registration". ● Enter the new password. ● Tap on "Login". Step 4 Step 5 Step 6 ● Switch on the WiFi. (lgnore this step if your phone is already connected to WiFi ) NOTICE:The robot is not 5G WiFi compatible. ● Choose the WiFi network. ● Enter the WiFi password. ● Tap on“Next". ● Choose your robot. Step 3 ● Tap on "Add a robot".
Connection Steps Step 7 ● Set the ON/OFF switch to I position. ● Mark the "Robot already switched on" field. ●Tap on "Next". Step 10 ● Tap on "Settings". Step 8 ● After switch on power switch,the robot start loading. And please wait until the voice announced "ready to clean". ● Tap on "Next". Step 11 ● Select "Robot-XXXX" connection. Step 9 ● Press and hold for 3 seconds and you will hear a buzz.
Connection Steps Step 13 Step 14 Step 15 ● Wait until the connection is completed. ● Set your robot's name. ● Tap on“Completed". ● The robot is connected and ready to use. FAQ Why no verification code received ? ● The verification code may be blocked by email. Please check your spam box. ● Please check if the email address is spelt correctly. Why connection timed out ? ● Please make sure the password is correct(Click to see the password you entered).
