Use and Care Manual

ManualsBrandsiLive ManualsElectricalTrue Wireless Stereo Bluetooth Earbuds with Rechargeable Case

Function Button

Press and hold to power ON.

Press to play/pause audio on

Bluetooth device.

Press and hold to power OFF.

See reverse side for more

detailed instructions.

Earbud Indicator LED

Red when charging.

Blue when fully charged.

Truly Wire Free Earbuds

User’s Guide for Model IAEBT449 v2256-01

Charger Power ON

Case will automatically

power o when not in use.

Charger DC Power Input (rear)

Earbud Charging

Contacts

Earbud Controls

Controls and features are the same for both earbuds.

Charging the Earbuds

For best results, charge fully before use. Charging time is

approximately 2 hours.

1. Open the cover and place the earbuds in their docking

stations (note Left and Right placement).

2. Close the case to ensure the contact between earbuds

and the case.

3. Use the Power switch on the case to power it ON and

begin charging the earbuds.

• While charging, the indicator on the earbuds will

turn red.

• When charging is complete, the indicator will turn

blue. After 5 minutes, the indicator and the case

will power o.

Charging the Case

For best results, charge fully before use. Charging time is

approximately 2 hours.

Using a Micro-USB to USB cable, connect to the USB port of a

powered on computer or USB power adaptor (not included) to

charge the case.

Microphone

Charger Power & Battery

Indicator LED

Flashing blue when case is charging.

Solid Blue when case is ON.

Individual LEDs show battery level.

NOTE: Each earbud must be

powered on separately.

Once they are linked, powering o

one earbud will power o both.

Summary of content (2 pages)

PAGE 1
Truly Wire Free Earbuds User’s Guide for Model IAEBT449 v2256-01 Earbud Controls Controls and features are the same for both earbuds. NOTE: Each earbud must be powered on separately. Once they are linked, powering off one earbud will power off both. Earbud Indicator LED Red when charging. Blue when fully charged. Earbud Charging Contacts Function Button Press and hold to power ON. Press to play/pause audio on Bluetooth device. Press and hold to power OFF.
PAGE 2
Linking Earbuds Note: After the initial connection, the earbuds will remain linked and will not need to be reconnected for each use. To link the earbuds: • Press and hold the Function button on both earbuds to power them on. The LEDs on both earbuds will quickly flash red and blue. • Quick press the Function button on the right earbud to pair the earbuds together.