Use and Care Manual

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [e-mail]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2018 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Audio Functions
• To play/pause audio, quickly press the Function button.
• To skip to the next audio track, press the Function
button twice while audio is playing.
• You can also or use the controls on the connected phone
to handle audio functions.
Speakerphone Functions
Note: Only the right earbud functions with phone calls.
• To accept or end a phone call, press the Function button.
• To reject a call, press and hold the Function button for
2 seconds.
• You can also or use the controls on the connected phone
to handle phone functions.
Auto-Charge Feature
While the case power is ON:
• Placing the earbuds in the charging case will
automatically power them o and begin charging.
Linking Earbuds
Note: After the initial connection, the earbuds will remain
linked and will not need to be reconnected for each use.
To link the earbuds:
• Press and hold the Function button on both earbuds to
power them on. The LEDs on both earbuds will quickly
ash red and blue.
• Quick press the Function button on the right earbud to
pair the earbuds together.
• When successfully paired, a voice will announce the
connection, and the right earbud LED will ash red and
blue, while the left one slowly ashes blue.
Pairing Bluetooth
Note: You can power on a single earbud to use as a single
unit, and it will function in Mono sound mode.
1. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on the right earbud
will continue ashing blue and red, indicating it is ready
to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IAEBT449 when
it is discovered. When successfully connected to your
Bluetooth device, a voice prompt will announce the
Bluetooth connection and the LED indicator on both
earbuds will blink blue once every 7 seconds.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.