Use and Care Manual
10
CONNECTING AUDIO
Digital Optical Audio
Requires a media source with an Optical Audio Output and a Digital Optical
Audio Cable (included).
1. Using a Digital Optical Audio Cable, connect the Optical Output on your
media source (TV, amplier, etc.) to the Optical Input on the base.
2. On the connected media source (TV, amplier, etc.), make sure the audio
settings are set to PCM or Optical Audio.
3. Audio played through the connected media source (TV, amplier, etc.) will now
be sent through the base.
Important tips for optical audio:
» Use the correct Optical cable and make sure that it is rmly seated in the
Optical Input/Output sockets on the base and the media source.
» Optical audio output is activated from the media source (a red light should be
visible from the Optical socket). It may be labeled SPDIF in the setting menu
of the source.
» The optical output source should be set to output PCM and not Dolby Digital.
Optical Input Optical Output