Use and Care Manual

LISTENING

Pairing the Headphones to the Base

Note: After the initial pairing, the headphones will stay paired to the transmitter

base. It will not be necessary to reconnect each time you use the headphones.

1. Press and hold the Power/Pair button to power on the headphones.

2. Press the Power/Pair button again to begin pairing. The headphones will

automatically detect the base and connect to it.

3. After a successful connection, the LED on the headphones will slowly blink

blue. The LED on the base will turn solid blue.

4. When you are nished using the headphones, press and hold the Power/

Pair button to power them off, then place them on the base to charge the

batteries while not in use.