5.1 Home Theater System with Bluetooth User’s Guide for Model IHTB138 v1972-01 For the most up-to-date version of this User’s Guide, go to www.iliveelectronics.
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Battery Warnings • WARNING: Do not ingest battery, Chemical Burn Hazard. • If the remote control supplied with this product contains a coin/button cell battery and the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Table of Contents Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5 Features Includes Power Speakers Orientation ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 6 Subwoofer Rear View Subwoofer Front View Remote ������������������
Setup Features • Bluetooth Wireless - range 60 ft. • 6 5.1 surround sound audio inputs • 2 stereo audio inputs Includes • Subwoofer (main unit) • 26" central speaker with 4 satellite speakers • Remote control: requires CR2025 battery (included) • 1 RCA to 3.5mm stereo audio cable • 3 RCA to RCA audio cables Power Plug the AC power cord into a standard wall outlet. AUX SPEAKER OUTPUT Speakers Connect each speaker wire with the corresponding port on the rear of the subwoofer.
Orientation Subwoofer Rear View Subwoofer Bass Tube AUX NOTE: To reduce unwanted vibration, try placing the subwoofer on a solid or padded surface, such as the floor or carpet. Stereo Audio Inputs (L, R) 5.1 Surround Sound Audio Inputs (FL, FR, SL, SR, CEN, SUB) SPEAKER OUTPUT Audio Outputs (to speakers) Main Power Switch Power the system ON or OFF. See info below.
Subwoofer Front View Source Press to switch between 5.1 CH, Aux In, and Bluetooth modes. SOURCE Pair Press to pair to a Bluetooth device. PAIR LED Indicator Lights Skip Press to skip ahead or back an audio track (BLUETOOTH). Remote Signal Receiver Play / Pause / Volume Press to play or pause audio (BLUETOOTH). Turn dial to adjust volume up or down. Speaker Status Indicator Light 5.
Remote Functions Note: When using the remote, be sure to aim at the remote signal receiver located on the front of the subwoofer. POWER MUTE Power Press to power the system ON or place it in Standby Mode. Mute Press to mute the volume. PAIR Aux Press to switch to Aux In (RCA) mode. 5.1CH Press to switch to 5.1 Surround Sound Mode. Press to switch to Bluetooth Mode. Volume-/+ Press to adjust volume for all speakers. Remote Batteries Requires 1 CR2025 battery (pre-installed).
Audio Inputs 2 Port Stereo RCA Inputs (Aux) If your TV, DVD, or other media player has a 3.5mm audio line output, use the top 2 audio inputs (Left/Right channel) on the rear of the subwoofer for stereo audio. While connected to the Aux inputs, the unit will send audio signal to all of it's speakers to simulate a surround sound effect. Requires a 3.5mm stereo audio cable (included). 1.
Audio Inputs 6 Port 5.1 Surround Sound RCA Inputs (5.1 CH) To use the 5.1 input on this system will require a source (TV, DVD, Blu-Ray, or other media player) with 5.1 Surround Sound analog audio outputs. If your media source is so equipped, use the use the lower 6 audio inputs on the rear of the subwoofer. Requires 6x RCA audio cables (included). 1. Connect the RCA audio cables to the RCA Inputs on the subwoofer and the audio outputs on your TV, DVD player, etc.
Bluetooth Wireless Pairing to a Bluetooth Device and Playing Audio Wirelessly After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat these steps. (remote) to select Bluetooth Mode, indicated by a 1. With the unit powered ON, press Source (subwoofer) or slowly flashing blue light. 2.
Customer Support Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Made Green Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.