Use and Care Manual

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [e-mail] | Email Parts: [e-mail]
Copyright © 2017 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output/headphone jack on an audio device.
2. The speaker will automatically switch to Line In Mode (“LINE” on the
display).
3. Use the controls on the connected device to select and play audio.
Bluetooth Wireless
Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or
you nd it is unable to connect, repeat the steps listed here.
1. Press the Source button to select Bluetooth Mode. The pairing indicator
(“bt” on the display) will begin slowly ashing.
2. Press and hold
to begin pairing. The pairing indicator (“bt” on the
display) will begin quickly ashing. Remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select ISB408 in
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 . Refer to the user’s manual for your specic device for
instructions on pairing and connecting Bluetooth devices.
4. When successfully paired, the pairing indicator (“bt” on the display) will
turn solid and an audible chime will sound from the unit.
5. Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker. Use the controls on the speaker or the connected
device to play, pause, and adjust volume.
SD Memory Cards & USB Drives
1. Load a SD memory card or USB drive into the appropriate port.
2. The speaker will automatically switch to USB Mode (“USB” on the display) or
SD Card Mode (“CARD” on the display).
3. Use the controls on the speaker to select and play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the unit to improve
FM radio reception.
Radio Tuning and Saving Station Presets
• Press the Source button to switch to FM Radio Mode. The display will show
the station frequency, Ex: 101.1.
• Press and hold
to scan and save radio stations automatically. Radio
stations will be assigned a “Pxx” number automatically.
• Press
to go to P01 and cycle through saved stations.
• Press and hold
to tune the frequency manually.
Charging the Battery
Requires a Micro-USB to USB cable (included). Charge fully before use.
1. When the speaker’s battery is low, the display will begin ashing. Using a
Micro-USB to USB cable (included), connect the DC Power Input on the
speaker to the USB port of a powered on computer or USB power adapter
(not included).